Model No. |
VSP128-20B-SDI-P |
Image Sensor |
1/2.8-type SONY CMOS Sensor |
Effective Pixels |
Approx. 2.38 Megapixels, 1920x1080 (Full HD) |
Lense |
20x optical zoom, f=4.7mm (wide) ~ 94 mm(tele) |
Aperture |
F1.6 ~ F3.5 |
Digital Zoom |
12X |
Horizontal Viewing Angle |
Approx. 70.2° ~ 4.1° (Image stabilizer OFF)
Approx. 60.0° ~ 3.5° (Image stabilizer ON) |
Min. Illumination |
0.5 Lux, 30 IRE |
Electronic Shutter |
NTSC/PAL: 1/1 ~ 1/10,000 sec |
White Balance |
ATW, USER1-5, ONE_PUSH |
Day/Night |
Auto(ICR), Color, B/W |
S/N Ratio |
≥50dB |
SDI Compliance |
SMPTE 259M, SMPTE 292M, SMPTE 296M, ITU‑R BT.656 and ITU‑R BT.601 |
Video Standards |
1080p_25, 1080p_23.98
1080i_59.94, 1080i_50
720p_59.94, 720p_50
480p_59.94, 576p_50 |
SDI Video Sampling |
4:2:2 |
SDI Color Precision |
4:2:2 |
Dome Drive |
|
Pan/Tilt Range |
Horizontal: 0°~360°endless, Vertical: -90°~90° auto flip 180° |
Speed |
Horizontal: 0.1°~250°/s, Vertical: 0.1°~120°/s |
Preset Speed |
Horizontal: 300°/s, Vertical: 300°/s |
Preset |
128 Points |
PTZ Mode |
Auto Pattern, Auto Tour, Auto scan |
3D Positioning |
Yes |
Speed Setup |
Human-oriented focal Length, Speed adaptation |
Power up Action |
Auto restore to previous PTZ and lense status after power failure |
Idle Motion Activate |
Preset, Scan, Tour, Patrol |
Protocol |
Pelco-D, Pelco-P, VISCA, BENESTON |
Infrared (IR Model) |
|
Illumintaor Projector |
8 Array |
Supplement Light Range |
IR Distance: up to 100m |
General |
|
Power Supply |
DC12V 4.0A or AC24V 3.0A |
Operating Temperature |
-30ºC ~ 60ºC, Humidity 90% or less (non-condensing) |
Storage Temperature |
-30ºC ~ 60ºC, Humidity 90% or less (non-condensing) |
Casing |
Aluminum Case |
Weight |
8kg |
Protection Level |
IP66 (International Protection Marking, IEC 60529) |
EMC Standard |
CE-EMC
EN55032:2015, EN55035:2017, EN61000-3-2:2019
EN61000-3-3:2013+A1:2019) |
Warranty |
1-year warranty |